Note: If you have chosen the stainless steel version of this system, all copper items will be replaced by highly polished SUS 304 stainless steel.
Skid-Mounted Brewhouse
1. 3 Brewkettle/Mash Tun
- Gross volume: 1300L Available volume: 1000L
- Heating method: steam heating
- Outer solid copper dome, highly polished
- Inner dome: SUS304 stainless steel plate, 3mm thick, internal polished
- Lower external vessel body: copper cladding on SUS 304 stainless steel
- Accessories include manway, spray ball, spray pipe, lower agitator, reduction gear, motor and temperature gauge, inner heater (if needed).
- Body: insulated with rockwool.
1.4 Lauter Tun & Whirlpool Combi Vessel
Dual tank vessel:
The upper vessel is the lauter tun
- Outer solid copper dome, highly polished
- Inner dome: SUS304 stainless steel plate, 3mm thick
- External vessel body: Solid copper cladding on SUS 304 stainless steel The lower vessel is the whirlpool
- The external of whirlpool tun is made of SUS304 stainless steel plate, 3mm thick, highly polished
- Body insulation with rock wool for heat preservation.
1.4.1 Lauter Tun:
- Gross volume: 1300L, available volume: 1000L,
- Equipped with manway, screen plate, waste grain port, CIP spray ball and sparging spray pipe.
1.4.2 Whirlpool
- Gross volume: 1300L, available volume: 1000L,
- Equipped with manway, spray ball and spray pipe.
1.5 Plate Heat Exchanger
- Cooling area: 5m2
- Made of SUS316
1.6 External Vent Stacks
- Specification: ?300x4m (two pieces)
- Made of copper plate, processed carefully, matched to the mash tun and brew kettle.
- The external exhaust is equipped with one vapor fan.
1.7 Wort Oxygen Device
- Made of SUS304 stainless steel and titanium, internal polished
- External is made of stainless steel, polished.
- Includes inlet and outlet of mash, sterile oxygen port (mix sterile oxygen with mash fully), with titanium stick.
1.8 Yeast additive device
- Volume: 10L
- Made of imported SUS304 stainless steel carefully, internal polished
- External is made of stainless steel, polished.
- Includes three connection ports: additive yeast port (with sight glasses), sterile air port (sterile air filter) and mash pipe connection port, with one double metal temperature gauge.
1.9 Brix measuring unit
- Columniform style
- External canister is with input water port, overflow water port an drain outlet
- Connected to the frame of the brewhouse.
- Made of SUS304 stainless steel, internal polished,
- External copper cladding is highly polished.
1.10 Workstation and staircase
- The frame is made of square stainless steel of 100*50,with guide rail and handrail.
1.11 Pump, pipe, valve
- 1.5 HP wort pump, sanitation grade
Fermentation System
2.1 Cylindrical-conical fermentation tanks
Gross volume: 1200L Available volume: 1000L
Cooling means: jacket cooling
Coolant medium: glycol
- Inner and outer of the tank are all made of SUS304 stainless steel, the internal side polished, the external is polished by auto-polishing machine.
- Stainless steel dimple plate glycol cooling jacket
- Internal tank is 3mm
- The external cladding is 2mm.
- On the bottom there is a 2” t/c drain, on the top there is an exhaust and CIP port, coolant in and coolant out pipe.
- The tank body is equipped with manway, sample cock, temperature sensor, spray pipe, CIP sprayball, pressure gauge and butterfly valves etc.
2.2 Fermentation auto-control Ranco controllers and Honeywell motorized ball valves
- Quantity: Determined by number of tanks
2.3 Portable CIP/Beer Transfer Pump
- 1HP, 3450 RPM washdown
- Steel cart
Serving/Bright/Conditioning Tanks
6.1 Serving tank (Jacketed BBT version)
Gross volume: 1200L Available volume: 1000L
Inner and outer hull are all made of SUS304 stainless steel, polished
- The thickness of the internal stainless steel hull is 3mm
- The thickness of the external plate is 2mm
- The beer in the tank body is cooled off by means of stainless steel dimple plate
- On the bottom there is an entrance; on the top there is an exhaust and CIP port, coolant in-out pipe.
- The accessories of the dispensing tank are spray ball, manway, sample cock, glass level tube, temperature sensor, spray pipe, pressure gauge and butterfly valves etc.
- Quantity:
ALTERNATIVE
6.1 Serving tank (Single shell SST version for use in walk-in cooler)
Gross volume: 1200L Available volume: 1000L
- Made of SUS304 stainless steel, polished
- The thickness of the tank wall is 3mm
- On the bottom there is a t/c outlet; on the top there is an exhaust and CIP port, coolant in-out pipe.
- The accessories of the dispensing tank are spray ball, manway, sample cock, glass level tube, temperature sensor, spray pipe, pressure gauge and butterfly valves etc.
- Quantity:
Note: For customers in the European Union our brewhouse control panel and pump motors will either be built in Europe, or supplied by a C.E. certified manufacturer. ABT tanks and vessels are not C.E. certified. European customers should contact us to discuss delivery options.
